Shop All
Categories

Log in to your account

Sign up for an account

When you become a partner with Petra, you get more than access to great products to resale... You will receive the following benefits!

  • Same Day Shipping
  • Lowest Price Guaranteed
  • No Minimum Order
  • Free Freight on Qualifed Orders

Log in to your account

Sign up for an account

When you become a partner with Petra, you get more than access to great products to resale... You will receive the following benefits!

  • Same Day Shipping
  • Lowest Price Guaranteed
  • No Minimum Order
  • Free Freight on Qualifed Orders

Electronic Crossover

wholesale local pickup in Edmond, Oklahoma
Related Categories Crossover
VIEW AS:
1 - 32 of 41
SHOW
  • Related Products Crossover
    Planet Audio® EC20B

    3-Way Electronic Crossover

    • 32Hz–250Hz continuously variable low pass
    • 40Hz–400Hz continuously variable high pass
    • 1x or 20x frequency multiplier
    • 6dB or 18dB/oct selectable slope
    • Independent front & rear level controls
    • 110dB signal-to-noise ratio
    • DC to DC power supply
    • Outputs for 3-way or front, rear & sub system configurations
    • Remote subwoofer level control
    • Variable bass boost 0dB–12dB
    • Dim: 1.88"H x 8.25"W x 5.13"D
    • Part No. 180002
    • SKU PLTEC20B
    • Vendor SKU EC20B
    • Retail Price$114.00
  • Related Products Crossover
    Planet Audio® EC10B

    2-Way Electronic Crossover

    • 35Hz–400Hz continuously variable low pass
    • 50Hz–1.5kHz continuously variable high pass
    • 6dB/oct crossover slope
    • Independent front & rear level controls
    • 110dB signal-to-noise ratio
    • DC to DC power supply
    • Subwoofer phase & stereo/mono switches
    • Remote subwoofer level control
    • 0dB–12dB @ 45Hz variable bass boost
    • Dim: 1.25"H x 7.25"W x 4.38"D
    • Part No. 180003
    • SKU PLTEC10B
    • Vendor SKU EC10B
    • Retail Price$67.00
  • Related Products Autotek
    Autotek® TA 1250.2

    TA Series 2-Channel Class AB Amp (1,200 Watts)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • Pro-Fi™ high-speed MOSFET devices
    • Sound Shield™ aluminum heat sink technology
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Heat-resistant black finish
    • Dim: 4"H x 12.7"W x 11.4"D
    • 1,200W max
    • 300W RMS x 2 @ 4Ω
    • 600W RMS x 2 @ 2Ω
    • 1,200W max x 1 @ 4Ω bridged
    • Part No. 291070
    • SKU AUTTA12502
    • Vendor SKU TA 1250.2
    • Retail Price$179.95
  • Autotek® TA 2050.2

    TA Series 2-Channel Class AB Amp (2,000 Watts)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • Pro-Fi™ high-speed MOSFET devices
    • Sound Shield™ aluminum heat sink technology
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Heat-resistant black finish
    • Dim: 4"H x 14.7"W x 11.4"D
    • 2,000W max
    • 500W RMS x 2 @ 4Ω
    • 1,000W RMS x 2 @ 2Ω
    • 2,000W max x 1 @ 4Ω bridged
    • Part No. 291071
    • SKU AUTTA20502
    • Vendor SKU TA 2050.2
    • Retail Price$219.99
  • Related Products 4 Channel Amp | Crunch
    Crunch® PX 1000.4

    POWERX Amp (4 Channels, Class AB, 1,000 Watts)

    • Bridgeable
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • 1,000W max
    • 125W RMS x 4 @ 4Ω
    • 250W RMS x 4 @ 2Ω
    • 500W RMS x 2 @ 4Ω bridged
    • Dim: 3.7"H x 12.6"W x 10.8"D
    • Part No. 291075
    • SKU CRUPX10004
    • Vendor SKU PX 1000.4
    • Retail Price$169.99
  • Related Products Crunch
    Crunch® PX 2000.1D

    POWERX Amp (Monoblock Class D, 2,000 Watts max)

    • Class D
    • Mono subwoofer amp
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • 2,000W max
    • 500W RMS x 1 @ 4Ω
    • 1,000W RMS x 1 @ 2Ω
    • 2,000W x 1 @ 1Ω D Class
    • Dim: 3.7"H x 13.3"W x 10.8"D
    • Part No. 291076
    • SKU CRUPX20001D
    • Vendor SKU PX 2000.1D
    • Retail Price$225.00
  • Related Products Crunch
    Crunch® PD 1500.1

    POWER DRIVE Monoblock Class AB Amp (1,500 Watts max)

    • Class AB monoblock
    • Mono subwoofer amp
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • Built-in variable electronic crossover (LP)
    • Onboard bass boost
    • 1,500W max
    • 750W RMS x 1 @ 4Ω
    • 1,500W RMS x 1 @ 2Ω
    • Dim: 3.8"H x 17"W x 11.4"D
    • Part No. 291067
    • SKU CRUPD15001
    • Vendor SKU PD 1500.1
    • Retail Price$199.99
  • Related Products Autotek | Amp
    Autotek® SS1500.2

    SUPER SPORT® Series 2-Channel Class AB Amp (1,500 Watts)

    • Sleek, aluminum heat sink
    • Low voltage RCA inputs
    • 3 operation modes—stereo, bridged mono, stereo/bridged mono
    • High level inputs for OEM tie-in with Molex® adapter
    • Preamp circuitry
    • LED system protection circuitry
    • Variable input voltage
    • Nickel-plated output connectors
    • Onboard electronic crossover
    • 1,500W max
    • 2 channels
    • Dim: 2"H x 12.3"W x 10.25"D
    • Part No. 322396
    • SKU AUTSS15002
    • Vendor SKU SS1500.2
    • Retail Price$199.99
  • Related Products Autotek
    Autotek® SS2500.4

    SUPER SPORT® Series 4-Channel Class AB Amp (2,500 Watts)

    • Sleek aluminum heat sink
    • Low voltage RCA inputs
    • 4 operation modes—4-channel stereo, dual stereo bridged, stereo + bridged mono & dual bridged mono
    • High level inputs for OEM tie-in with Molex® adapter
    • Preamp circuitry
    • LED system protection circuitry
    • Variable input voltage
    • Nickel-plated output connectors
    • Onboard electronic crossover
    • 2,500W max
    • 4 channels
    • Dim: 2"H x 11"W x 10.25"D
    • Part No. 322399
    • SKU AUTSS25004
    • Vendor SKU SS2500.4
    • Retail Price$239.99
  • Related Products Marine Amp | Stereo Amplifier
    Pyle® PLMRMP3B

    Hydra Series 4-Channel 800-Watt Waterproof Micro Marine Class AB Amp

    • 800W max
    • 200W max x 4 @ 4Ω
    • 100W RMS x 4 @ 4Ω
    • 300W RMS x 4 @ 2Ω
    • 10A fuse
    • RCA line input
    • THD: 95dB
    • Anti-thump turn on
    • 2Ω stereo stable
    • Power-protection circuitry
    • Channel separation: >65dB
    • Electronic crossover network
    • Adjustable high- & low-level inputs
    • Freq resp: 10Hz–40kHz
    • Includes waterproof stereo 3.5mm to stereo RCA adapter, volume gain remote control & waterproof poly bag
    • Dim: 1.38"H x 6.1"W x 3.35"D
    • Part No. 245226
    • SKU PYLPLMRMP3B
    • Vendor SKU PLMRMP3B
    • Retail Price$122.99
  • Related Products Crunch
    Crunch® PD 800.2

    POWER DRIVE 2-Channel Bridgeable Class AB Amp (800 Watts max)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • 2- & 3-channel operation modes
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Easily ties into OEM audio systems
    • 800W max
    • 200W RMS x 2 @ 4Ω
    • 400W RMS x 2 @ 2Ω
    • 800W RMS x 1 @ 4Ω bridged
    • Dim: 3.8"H x 12"W x 11.4"D
    • Part No. 291057
    • SKU CRUPD8002
    • Vendor SKU PD 800.2
    • Retail Price$149.99
  • Related Products Crunch
    Crunch® PD 2000.2

    POWER DRIVE 2-Channel Bridgeable Class AB Amp (2,000 Watts max)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • Low-level RCA inputs & outputs
    • 2- & 3-channel operation modes
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Easily ties into OEM audio systems
    • 2,000W max
    • 500W RMS x 2 @ 4Ω
    • 1,000W RMS x 2 @ 2Ω
    • 2,000W RMS x 1 @ 4Ω bridged
    • Dim: 3.8"H x 17.8"W x 11.4"D
    • Part No. 291060
    • SKU CRUPD20002
    • Vendor SKU PD 2000.2
    • Retail Price$239.99
  • Crunch® PD 1000.4

    POWER DRIVE 4-Channel Pro Power Bridgeable Class AB Amp (1,000 Watts max)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • High-level inputs
    • Low-level RCA inputs & outputs
    • 2- & 3-channel operation modes
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Easily ties into OEM audio systems
    • 1,000W max
    • 125W RMS x 4 @ 4Ω
    • 250W RMS x 4 @ 2Ω
    • 500W RMS x 2 @ 4Ω bridged
    • Dim: 3.8"H x 14.2"W x 11.4"D
    • Part No. 291063
    • SKU CRUPD10004
    • Vendor SKU PD 1000.4
    • Retail Price$169.99
  • Related Products 4 Channel Amp | Crunch
    Crunch® PD 4000.4 PRO POWER

    POWER DRIVE 4-Channel Pro Power Bridgeable Class AB Amp (4,000 Watts max)

    • Class AB
    • Bridgeable
    • Variable input voltage
    • QTD (Quick Thermal Dispersion) technology heat sink
    • Low-noise preamp
    • High-level inputs
    • Low-level RCA inputs & outputs
    • 2- & 3-channel operation modes
    • Built-in variable electronic crossover (HP & LP)
    • Onboard bass boost
    • Easily ties into OEM audio systems
    • 4,000W max
    • 500W RMS x 4 @ 4Ω
    • 1,000W RMS x 4 @ 2Ω
    • 2,000W RMS x 2 @ 4Ω bridged
    • Dim: 3.8"H x 21"W x 11.4"D
    • Part No. 291066
    • SKU CRUPD40004
    • Vendor SKU PD 4000.4 PRO POWER
    • Retail Price$339.99
  • Related Products Hifonics
    Hifonics® BXX1200.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (1,200 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 1,200W x 1 @ 1Ω
    • 400W x 1 @ 4Ω
    • 600W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329958
    • SKU HIFBXX12001D
    • Vendor SKU BXX1200.1D
    • Retail Price$349.00
  • Related Products Hifonics
    Hifonics® BXX1600.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (1,600 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 1,600W x 1 @ 1Ω
    • 450W x 1 @ 4Ω
    • 800W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329959
    • SKU HIFBXX16001D
    • Vendor SKU BXX1600.1D
    • Retail Price$449.00
  • Related Products Hifonics
    Hifonics® BXX2000.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (2,000 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 2,000W x 1 @ 1Ω
    • 500W x 1 @ 4Ω
    • 1,000W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329960
    • SKU HIFBXX20001D
    • Vendor SKU BXX2000.1D
    • Retail Price$569.00
  • Related Products Hifonics
    Hifonics® BXX2400.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (2,400 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 2,400W x 1 @ 1Ω
    • 600W x 1 @ 4Ω
    • 1,200W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329961
    • SKU HIFBXX24001D
    • Vendor SKU BXX2400.1D
    • Retail Price$689.99
  • Related Products Hifonics
    Hifonics® BXX3000.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (3,000 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 3,000W x 1 @ 1Ω
    • 700W x 1 @ 4Ω
    • 1,400W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329962
    • SKU HIFBXX30001D
    • Vendor SKU BXX3000.1D
    • Retail Price$799.00
  • Related Products Hifonics Amp | Hifonics
    Hifonics® BXX4000.1D

    BRUTUS® BXX Series Monoblock Super D Class® Subwoofer Amp (4,000 Watts)

    • 1Ω stable
    • 0°–180° phase adjustment
    • Nickel-plated RCA jacks resist corrosion
    • Variable electronic crossover allows for complete control of sound
    • Ultra-Fi™ MOSFET outputs for high power & efficient cooling with minimal distortion
    • Aluminum heat sink minimizes heat buildup
    • Simpatico coil design keeps voltage constant through Ultra-Fi™ MOSFET outputs
    • Molded & angled connection types
    • Monitor overload & speaker short protection with illuminated LED indicators on end panel
    • Low-noise preamp circuitry
    • 12-gauge speaker terminal wire
    • Freq resp: 10Hz–250Hz
    • 0dB–10dB bass boost
    • 15Hz–35Hz subsonic filter
    • 4,000W x 1 @ 1Ω
    • 1,000W x 1 @ 4Ω
    • 2,000W x 1 @ 2Ω
    • Includes bass remote & manual
    • Part No. 329963
    • SKU HIFBXX40001D
    • Vendor SKU BXX4000.1D
    • Retail Price$999.99
  • Related Products Mb Quart
    MB Quart® NA540.6

    Nautic Series Class AB Amp (6 channels, 540 Watts max)

    • Class AB
    • Marine grade, conformal-coated PC boards to resist corrosion from salt spray& moisture
    • ABYC & ASTM certified
    • Life Shield badge indicates speakers are waterproof, dustproof, snowproof & shockproof
    • Q-Stasis preamp keeps incoming noise from source units at nearly immeasurablelevels, improving quality
    • Class SQ & Class Q1 circuitry—the same found in high-end mobile audio units
    • Built-in equalization with variable frequency adjustment
    • FLUID-FETS technology efficiently produces power & mimic the sound quality of the highest-end home amps
    • Voltage gain: .2V–6V
    • Signal-to-noise ratio: >93dB
    • Freq resp: 10Hz–45kHz
    • Crossover type: Electronic 12dB per octave
    • Tone control
    • Bass EQ: 0dB–9dB @ 45Hz
    • No 1Ω applications
    • Dim: 2.2"H x 17.01"W x 9.4"D
    • 540W max
    • 60W x 6 @ 4Ω
    • 100W x 6 @ 2Ω
    • 200W x 3 @ 4Ω bridged
    • Channels 1–6 crossover freq range: High pass 250Hz–4kHz; Low pass 40Hz–250Hz
    • Part No. 294111
    • SKU MBQNA5406
    • Vendor SKU NA540.6
    • Retail Price$419.99
  • MB Quart® FA1-200.2

    Formula Series 100-Watt 2-Channel Class AB Amp

    • 100 x 2 watts at 2 ohm
    • 50 watts x 2 at 4 ohms
    • 200 watts mono bridged x 1 at 4 ohms
    • Variable high-pass crossover with 12 dB per octave: Switched, Full/HPF/LPF, 50 Hz to 500 Hz
    • Variable low-pass crossover with 12 dB per octave: Switched, Full/HPF/LPF, 50 Hz to 250 Hz
    • Frequency response: 10 Hz to 45 kHz
    • Bass boost: 0 dB to 9 dB
    • Utilizes the unique MB Quart® Class SQ topology and is matched with Q-Stasis for sonic accuracy and clarity that exceeds standard Class AB amps
    • Q-Stasis low-noise preamp provides maximum low voltage signal from the source unit into the amp circuit with minimal distortion
    • FLUID-FET output devices are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest-end home amps
    • Rugged MOSFET PWM (Pulse Width Modulation) power supply allows amp to produce efficient power without taxing the vehicle electrical system
    • Variable electronic crossovers allow for complete control of the sound
    • Heavy-duty heat sink efficiently moves heat from the MOSFET where it can be cooled
    • High-level inputs with DC Signal Sense switch allows amp to turn on when a signal is received on the RCA inputs, so an amp remote turn-on wire is not needed to turn on the amplifier; can also be turned off
    • RCA nickel-plated inputs are high-temperature, erosion-resistant and impact-resistant with hex screw terminals for secure connections
    • LED system protection circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the amp's end panel
    • Includes owner's manual
    • Part No. 338190
    • SKU MAXXFA12002
    • Vendor SKU FA1-200.2
    • Retail Price$149.99
  • MB Quart® FA1-400.4

    Formula Series 400-Watt 4-Channel Class AB Amp

    • 50 watts x 4 at 2 ohm
    • 100 watts x 4 at 4 ohms
    • Bridgeable
    • Variable high-pass crossover with 12 dB per octave: CH1 and CH2: Switched, Full/HPF/LPF, 50 Hz to 500 Hz ; CH3 and CH4: Switched, Full/HPF/LPF, 50 Hz to 500 Hz
    • Variable low-pass crossover with 12 dB per octave: CH1 and CH2: Switched, Full/HPF/LPF, 50 Hz to 500 Hz ; CH3 and CH4: Switched, Full/HPF/LPF, 50 Hz to 500 Hz
    • Frequency response: 10 Hz to 45 kHz
    • Bass boost: 0 dB to 9 dB
    • Utilizes the unique MB Quart® Class SQ topology and is matched with Q-Stasis for sonic accuracy and clarity that exceeds standard Class AB amps
    • Q-Stasis low-noise preamp provides maximum low voltage signal from the source unit into the amp circuit with minimal distortion
    • FLUID-FET output devices are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest-end home amps
    • Rugged MOSFET PWM (Pulse Width Modulation) power supply allows amp to produce efficient power without taxing the vehicle electrical system
    • Variable electronic crossovers allow for complete control of the sound
    • Heavy-duty heat sink efficiently moves heat from the MOSFET where it can be cooled
    • High-level inputs with DC Signal Sense switch allows amp to turn on when a signal is received on the RCA inputs, so an amp remote turn-on wire is not needed to turn on the amplifier; can also be turned off
    • RCA nickel-plated inputs are high-temperature, erosion-resistant and impact-resistant with hex screw terminals for secure connections
    • LED system protection circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the amp's end panel
    • Includes owner's manual
    • Part No. 338191
    • SKU MAXXFA14004
    • Vendor SKU FA1-400.4
    • Retail Price$269.99
  • Related Products Mb Quart
    MB Quart® NA-360.4

    Nautic Series Class AB Amp (4 channels, 360 Watts max)

    • Class AB
    • Marine-grade, conformal-coated PC boards to resist corrosion from salt spray & moisture
    • ABYC & ASTM certified
    • Life Shield badge indicates speakers are waterproof, dustproof, snowproof & shockproof
    • Q-Stasis preamp keeps incoming noise from source units at nearly immeasurable levels, improving quality
    • Class SQ & Class Q1 circuitry—the same found in high-end mobile audio units
    • Built-in equalization with variable frequency adjustment
    • FLUID-FETS technology efficiently produces power & mimic the sound quality of the highest-end home amps
    • Voltage gain: .2V–6V
    • Signal-to-noise ratio: >93dB
    • Freq resp: 10Hz–45kHz
    • Crossover type: Electronic 12dB per octave
    • Tone control
    • Bass EQ: 0dB–9dB @ 45Hz
    • No 1Ω applications
    • Dim: 2.2"H x 13.6"W x 9.4"D
    • 360W max
    • 60W x 4 @ 4Ω
    • 100W x 4 @ 2Ω
    • 200W x 2 @ 4Ω bridged
    • Part No. 294109
    • SKU MBQNA3604
    • Vendor SKU NA-360.4
    • Retail Price$219.99
  • Related Products Mb Quart
    MB Quart® NA710.5

    Nautic Series Class AB Amp (5 channels, 710 Watts max)

    • Class AB with Class D 5th channel
    • Marine grade, conformal-coated PC boards to resist corrosion from salt spray& moisture
    • ABYC & ASTM certified
    • Life Shield badge indicates speakers are waterproof, dustproof, snowproof & shockproof
    • Q-Stasis preamp keeps incoming noise from source units at nearly immeasurable levels, improving quality
    • Class SQ & Class Q1 circuitry—the same found in high-end mobile audio units
    • Built-in equalization with variable frequency adjustment
    • FLUID-FETS technology efficiently produces power & mimic the sound qualityof the highest-end home amps
    • Voltage gain: .2V–6V
    • Signal-to-noise ratio: >93dB
    • Freq resp: 10Hz–45kHz
    • Crossover type: Electronic 12dB per octave
    • Tone control
    • Bass EQ: 0dB–9dB @ 45Hz
    • No 1Ω applications
    • Dim: 2.2"H x 17.9"W x 9.4"D
    • 360W max
    • 60W x 4 + 200 x 1 @ 4Ω
    • 100W x 4 + 350W x 1 @ 2Ω
    • Part No. 294110
    • SKU MBQNA7105
    • Vendor SKU NA710.5
    • Retail Price$389.99
  • MB Quart® FA1-1000.1D

    Formula Series Monoblock Class D Amp (1,000 Watts)

    • 1,000 watts at 1 ohm
    • 500 watts at 2 ohms
    • 250 watts at 4 ohms
    • 1 ohm stable
    • Variable low-pass crossover with 12 dB per octave: 50 Hz to 250 Hz
    • Frequency response: 15 Hz to 250 Hz
    • Bass boost: 0 dB to 12 dB
    • D-Class amp with increased engineering that focuses on sound quality from the power supply through the output devices, the FLUID-FETS
    • FLUID-FET output devices are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest-end home amps
    • Q-Stasis low-noise preamp provides maximum low voltage signal from the source unit into the amp circuit with minimal distortion
    • Rugged MOSFET PWM (Pulse Width Modulation) power supply allows amp to produce efficient power without taxing the vehicle electrical system
    • Variable electronic crossovers allow for complete control of the sound
    • Heavy-duty heat sink efficiently moves heat from the MOSFET where it can be cooled
    • High-level inputs with DC Signal Sense switch allows amp to turn on when a signal is received on the RCA inputs, so an amp remote turn-on wire is not needed to turn on the amplifier; can also be turned off
    • RCA nickel-plated inputs are high-temperature, erosion-resistant and impact-resistant with hex screw terminals for secure connections
    • Heavy-duty output connectors allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amp
    • LED system protection circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the amp's end panel
    • Includes wired bass remote for making subtle changes to bass response from the cabin and owner's manual
    • Part No. 338192
    • SKU MAXXFA110001D
    • Vendor SKU FA1-1000.1D
    • Retail Price$299.99
  • MB Quart® FA1-1500.1

    Formula Series Monoblock Class D Amp (1,500 Watts)

    • 1,500 watts at 1 ohm
    • 750 watts at 2 ohms
    • 375 watts at 4 ohms
    • 1 ohm stable
    • Variable low-pass crossover with 12 dB per octave: 50 Hz to 250 Hz
    • Frequency response: 15 Hz to 250 Hz
    • Bass boost: 0 dB to 12 dB
    • D-Class amp with increased engineering that focuses on sound quality from the power supply through the output devices, the FLUID-FETS
    • FLUID-FET output devices are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest-end home amps
    • Q-Stasis low-noise preamp provides maximum low voltage signal from the source unit into the amp circuit with minimal distortion
    • Rugged MOSFET PWM (Pulse Width Modulation) power supply allows amp to produce efficient power without taxing the vehicle electrical system
    • Variable electronic crossovers allow for complete control of the sound
    • Heavy-duty heat sink efficiently moves heat from the MOSFET where it can be cooled
    • High-level inputs with DC Signal Sense switch allows amp to turn on when a signal is received on the RCA inputs, so an amp remote turn-on wire is not needed to turn on the amplifier; can also be turned off
    • RCA nickel-plated inputs are high-temperature, erosion-resistant and impact-resistant with hex screw terminals for secure connections
    • Heavy-duty output connectors allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amp
    • LED system protection circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the amp's end panel
    • Includes wired bass remote for making subtle changes to bass response from the cabin and owner's manual
    • Part No. 338193
    • SKU MAXXFA115001
    • Vendor SKU FA1-1500.1
    • Retail Price$349.99
  • MB Quart® FA1-2000.1

    Formula Series Monoblock Class D Amp (2,000 Watts)

    • 2,000 watts at 1 ohm
    • 1,000 watts at 2 ohms
    • 500 watts at 4 ohms
    • 1 ohm stable
    • Variable low-pass crossover with 12 dB per octave: 50 Hz to 250 Hz
    • Frequency response: 15 Hz to 250 Hz
    • Bass boost: 0 dB to 12 dB
    • D-Class amp with increased engineering that focuses on sound quality from the power supply through the output devices, the FLUID-FETS
    • FLUID-FET output devices are painstakingly selected for their ability to efficiently produce power and mimic the sound quality of the highest-end home amps
    • Q-Stasis low-noise preamp provides maximum low voltage signal from the source unit into the amp circuit with minimal distortion
    • Rugged MOSFET PWM (Pulse Width Modulation) power supply allows amp to produce efficient power without taxing the vehicle electrical system
    • Variable electronic crossovers allow for complete control of the sound
    • Heavy-duty heat sink efficiently moves heat from the MOSFET where it can be cooled
    • High-level inputs with DC Signal Sense switch allows amp to turn on when a signal is received on the RCA inputs, so an amp remote turn-on wire is not needed to turn on the amplifier; can also be turned off
    • RCA nickel-plated inputs are high-temperature, erosion-resistant and impact-resistant with hex screw terminals for secure connections
    • Heavy-duty output connectors allow for secure electrical signal to pass into wiring and resist erosion which will add longevity to the amp
    • LED system protection circuitry diagnostics monitor overload and speaker short protection with illuminated indicators on the amp's end panel
    • Includes wired bass remote for making subtle changes to bass response from the cabin and owner's manual
    • Part No. 338194
    • SKU MAXXFA120001
    • Vendor SKU FA1-2000.1
    • Retail Price$349.99
  • Blaupunkt® BP1299

    Bluetooth® LED Capsule Speaker with FM Radio

    • Multicolored LED lighting across speaker face
    • Lightweight and portable
    • Stereo-active 2-way crossover system
    • 3 watts x 2 power output
    • Bluetooth® 4.2 range: 32 ft.
    • Hands-free call answering and music streaming
    • TF/microSD™ Card slot (supports up to 32 GB), USB input, and 3.5 mm aux input
    • Rechargeable 3.7-volt, 1,200 mAh battery charges via USB
    • Up to 2 hours of play time
    • Up to 4 hours of charging time
    • Power on and charging indicator
    • Power on/off switch
    • Includes USB charging cable and 3.5 mm aux cable
    • Part No. 338804
    • SKU BP1299
    • Vendor SKU BP1299
    • Retail Price$29.99
  • Crunch® PZ-1020.2

    POWERZONE 2-Channel Class AB Amp (1,100 Watts)

    • 1,100 watts mono bridged @ 4 ohms
    • 275 watts x 2 @ 4 ohms
    • 550 watts x 2 @ 2 ohms
    • 0 to 9 dB bass boost
    • Red heat sink elements
    • SPEED-FET output devices to maximize power efficiency while improving sound quality and minimizing distortion
    • High-level inputs to integrate with OEM systems
    • Fully adjustable electronic crossovers
    • Low-voltage RCA inputs produce the highest sound quality without interference and minimal distortion in the signal path
    • Ability to daisy-chain multiple amps to eliminate additional signal cables from the source unit
    • LED system protection circuitry diagnostics
    • Includes owner's manual
    • Part No. 337323
    • SKU CRUPZ10202
    • Vendor SKU PZ-1020.2
    • Retail Price$189.99
  • Related Products Crunch
    Crunch® PZ-2020.2

    POWERZONE 2-Channel Class AB Amp (2,000 Watts)

    • 2,000 watts mono bridged @ 4 ohms
    • 500 watts x 2 @ 4 ohms
    • 1,000 watts x 2 @ 2 ohms
    • 0 to 9 dB bass boost
    • Red heat sink elements
    • SPEED-FET output devices to maximize power efficiency while improving sound quality and minimizing distortion
    • High-level inputs to integrate with OEM systems
    • Fully adjustable electronic crossovers
    • Low-voltage RCA inputs produce the highest sound quality without interference and minimal distortion in the signal path
    • Ability to daisy-chain multiple amps to eliminate additional signal cables from the source unit
    • LED system protection circuitry diagnostics
    • Includes owner's manual
    • Part No. 337324
    • SKU CRUPZ20202
    • Vendor SKU PZ-2020.2
    • Retail Price$239.99
  • Crunch® PZ-3520.2-PRO

    POWERZONE 2-Channel Class AB Amp (3,500 Watts)

    • 3,500 watts mono bridged @ 4 ohms
    • 875 watts x 2 @ 4 ohms
    • 1,750 watts x 2 @ 2 ohms
    • 0 to 9 dB bass boost
    • Red heat sink elements
    • SPEED-FET output devices to maximize power efficiency while improving sound quality and minimizing distortion
    • High-level inputs to integrate with OEM systems
    • Fully adjustable electronic crossovers
    • Low-voltage RCA inputs produce the highest sound quality without interference and minimal distortion in the signal path
    • Ability to daisy-chain multiple amps to eliminate additional signal cables from the source unit
    • LED system protection circuitry diagnostics
    • Includes wired bass remote and owner's manual
    • Part No. 337325
    • SKU CRUPZ35202PRO
    • Vendor SKU PZ-3520.2-PRO
    • Retail Price$299.00
Related Categories Crossover
VIEW AS:
1 - 32 of 41
SHOW