Sub Woofer

•  300W RMS power
•  600W max power rating
• Class D amp
• Two 12" polypropylene-coated fiber composite woofers
•  1 front-firing active driver & 1 down-firing passive driver
• Freq resp: 28Hz–150Hz
• LFE (low frequency effects) input
• Auto power via signal sensing
• Sub output: 106dB SPL
• Dim: 16.62"H x 14.5"W x 15.5"D with dampened rubber feet
• Black wood-grain vinyl finish
• Each

• 10"
• 350W max, 160W RMS power
• Freq resp: 26Hz–180Hz variable
• Sensitivity:90dB
• Signal-to-noise ratio: >80dB
• Imp: 8Ω
• Down-firing, heavy-duty long-throw subwoofer with Venturi-tuned port & high-power magnet
• BASH-technology-powered amp
• Adjustable crossover, adjustable volume control & auto on/off signal sensing
• Dolby® Pro Logic® & Dolby® Digital/DTS® LFE inputs
• High level inputs & outputs with gold-plated terminals
• Dim: 16.5"H x 15"W x 13"D
• 7-year warranty on woofer & 2-year limited warranty on amp & associated electronics
• Black
• Each

• 12"
• 430W max, 200W RMS power
• Freq resp: 23Hz–180Hz variable
• Sensitivity:90dB
• Signal-to-noise ratio: >80dB
• Imp: 8Ω
• Down-firing, heavy-duty long-throw subwoofer with Venturi-tuned port & high-power magnet
• BASH-technology-powered amp
• Adjustable crossover, adjustable volume control & auto on/off signal sensing
• Dolby® Pro Logic® & Dolby® Digital/DTS® LFE inputs
• High level inputs & outputs with gold-plated terminals
• Dim: 18.5"H x 17"W x 14"D
• 7-year warranty on woofer & 2-year limited warranty on amp & associated electronics
• Black
• Each

• 8" x 5.25" woofer
• 160W max, 50W nominal
• Aluminum cone
• Urethane surround
• Built-in Class D amp
• Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes
• Gain, LPF, phase & bass modes controllable at remote
• Freq resp, Deep Mode: 20Hz–200Hz
• Freq resp, Dynamic Mode: 40Hz–160Hz
• Sensitivity, Deep Mode: 95dB @ 1W/1m
• Sensitivity, Dynamic Mode: 100dB @ 1W/1m
• Rectangular dome-shape enclosure
• Can be installed in multiple locations including small, tight spaces such as behind seats, under seats or inside small storage compartments
• Includes wired remote bass control knob, power/ground/remote wiring harness & manual

•  200W RMS power
•  400W max power rating
• Class D amp
• Two 8" polypropylene-coated fiber composite woofers
•  1 front-firing active driver & 1 down-firing passive driver
• Freq resp: 32Hz–150Hz
• LFE (low frequency effects) input
• Auto power via signal sensing
• Sub output: 100dB SPL
• Dim: 13.62"H x 11.75"W x 12.5"D with dampened rubber feet
• Black wood-grain vinyl finish
• Each

• 475W max
• BASH-designed amp
• 12" custom Eviction Series woofer with high-power magnet
• Freq resp: 25Hz–200Hz
• Variable/adjustable crossover: 40Hz–180Hz
• Gold-plated speaker level inputs
• RCA input
• Auto on/off
• Phase switch
• Adjustable volume control
• Flared port
• MDF black vinyl cabinet
• Dim: 17"H x 14.75"W x 17.5"D
• 5-year parts & labor warranty on driver
• Each

• .75" spacer to decrease depth of subwoofer
• MDF construction
• 10" speaker woofer spacer
• Each

• .75" spacer to decrease depth of subwoofer
• MDF construction
• 12" speaker woofer spacer
• Each

• For amplified sound systems
• Includes Ford®, Lincoln® & Mercury® 2003-2005 turbowire & 8-pin harness with a pair of RCAs for the OE woofer(s)

• KAC-5207 amp & 2 KFC-W110S subwoofers combo
• Stereo/bridgeable amp
• 500W max power
• 70W RMS x 2 @ 4Ω
• Speaker level input
• Low-pass filter
• Signal-sensing turn-on
• Pair of 10" single 8Ω subwoofers
• 200W RMS for each sub
• Polypropylene injection-molded woofer cones
• 28.9oz ferrite magnet structure
• Cutout dim: 10 13/16"
• Includes installed 25A ATO fuse, 7" speaker-level input harness, four .63" self-tapping screws & Eng/Fr/Sp instruction manual

• KAC-5207 amp & 2 KFC-W112S subwoofers combo
• Stereo/bridgeable amp
• 500W max power
• 70W RMS x 2 @ 4Ω
• Speaker level input
• Low-pass filter
• Signal-sensing turn-on
• Pair of 12" polypropylene injection-molded woofer cones
• 200W RMS for each sub
• 28.9oz ferrite magnet structure
• 2" high-temperature voice coil
• Includes installed 25A ATO fuse, 7" speaker-level input harness, four .63" self-tapping screws & Eng/Fr/Sp instruction manual

•  100W nominal, 150W max
•  Poly woofer with butyl rubber surround
•  Proven mounting system
•  Grille may be painted to match mounting surface
•  Freq resp: 30Hz–120Hz
•  Sensitivity: 85dB @ 1W/1m
•  Imp: 4Ω nominal
•  Includes magnetically attached, perforated round frameless grille
• Each

• 250W
• 10" long excursion-treated paper cone woofer
• Inverted ferrite magnet structure
• Designed to use with the Proficient® M3 amp/crossover
• Freq resp: 36Hz–150Hz
• Includes thin-bezel grille held by neo magnets
• Used with BB-IWS10 MDF black box in new construction applications
• Dim: 13.63"H x 13.63"W x 3.75"D
• Wall cutout: 12.06"H x 12.06"W

• 12" PRO Series subwoofer
• 1,500W max power (450W nominal)
• Optimally blended pulp cone woofer with corrugated surround
• Dual 4Ω voice coil
• Designed for high sensitivity & power handling

•  250W RMS power
•  500W max power rating
• Class D amp
• Two 10" polypropylene-coated fiber composite woofers
•  1 front-firing active driver & 1 down-firing passive driver
• Freq resp: 30Hz–150Hz
• LFE (low frequency effects) input
• Auto power via signal sensing
• Sub output: 103dB SPL
• Dim: 15.12"H x 13.25"W x 14"D with dampened rubber feet
• Black wood-grain vinyl finish
• Each

• 500W max
• BASH-designed amp
• 12" long-throw woofer with high-power magnet
• Freq resp: 24Hz–200Hz
• Adjustable crossover & volume control
• Ported design for extended bass output
• Auto on/off with LED indicator & signal sensing
• Line level input enables easy installation
• Gold-plated speaker level inputs & outputs
• Dim: 17"H x 15"W x 18.25"D
• 7-year woofer warranty & 2-year amp warranty
• Contemporary black lacquer top & wood-grain sides
• Each

• Self-powered subwoofer
• Premium 15" high excursion woofer
• 3" high temperature pure copper voice coil
• 2,600W peak Class D digital amplifier
• Max SPL of over 130dB
• Frequency response: (-10dB) 40-2000Hz
• M20 pole mount
• Side handles
• XLR inputs/outputs
• 3 Mode 24bit/96KHz DSP
• LED Indicators for Peak & Power
• Multiple voltage for worldwide use – 110V ~ 240V 50/60 Hz

• Self-powered subwoofer
• Premium 18" high excursion woofer
• 3" high temperature pure copper voice coil
• 3,400W peak Class D digital amplifier
• Max SPL of over 132dB
• Frequency response: (-10dB) 38-1800Hz
• XLR inputs/outputs
• M20 pole mount
• Side handles
• 3 mode 24bit/96KHz DSP
• LED indicators for peak & power
• Multiple voltage for worldwide use – 110V ~ 240V 50/60 Hz

• Woofer with single 4Ω voice coil
• Patented Bass Tube® enclosure provides maximum output
• Ideal bass solution for pickups or any vehicle where space is a concern
• 8"
• 150W max

• Woofer with single 4Ω voice coil
• Patented Bass Tube® enclosure provides maximum output
• Ideal bass solution for pickups or any vehicle where space is a concern
• 6"
• 100W max

• 12" 2Ω/4Ω woofer
• 1,200W max
• 250W RMS
• .75" MDF construction
• Cerwin-Vega® Mobile embroidered logo
• Includes remote bass knob & mesh grille

• 12" woofer
• 1,300W max, 350W nominal
• Cellulose fiber cone
• Urethane surround
• Built-in 300W Class D amp
• Variable bass boost (0dB–12dB, 40Hz–100Hz)
• Gain & frequency control at side panel
• Freq resp: 20Hz–125Hz
• Sensitivity: 114dB @ 1W/1m
• Carpeted, trapezoidal prism enclosure shape for nonslip, durable & scratch-resistant surface
• Can be installed in multiple locations
• Includes wired remote bass control knob, power/ground/remote wiring harness & manual

• 10" woofer
• 1,100W max, 300W nominal
• Cellulose fiber cone
• Urethane surround
• Built-in 300W Class D amp
• Variable bass boost (0dB–12dB, 40Hz–100Hz)
• Gain & frequency control at side panel
• Freq resp: 20Hz–125Hz
• Sensitivity: 112dB @ 1W/1m
• Carpeted, trapezoidal prism enclosure shape for nonslip, durable & scratch-resistant surface
• Can be installed in multiple locations
• Includes wired remote bass control knob, power/ground/remote wiring harness & manual

• Dual 2" high temperature 4Ω voice coils allow subwoofer to handle more power
• High-energy Y30 motor assembly for higher output with minimal amp power
• Molded polypropelyne cone with UV butyl rubber surround adds additional strength in high SPL applications
• Round, reinforced dust cap adds necessary weight to the mechanical function of the woofer & keeps the cone rigid
• Stamped steel basket allows for additional strength during high volume bass passages to avoid flex in the frame
• Front & rear venting allows cooler air to be exchanged in the voice coil gap which helps the subwoofer make deep bass & extend the life of the component
• Polyester & cotton-blended spider resists softening & sagging over time
• Nickel plated push & insert terminals resist corrosion & aid in easy installation
• Designed for small sealed & medium to large ported (vented) enclosures
• 10"
• 600W max/300W RMS
• Cutout: 9.1"
• Mounting depth: 4.94"
• Outside dia: 10.09"
• Mounting height with grille & gasket: 5.75"

• Dual 2" high temperature 4Ω voice coils allow subwoofer to handle more power
• High-energy Y30 motor assembly for higher output with minimal amp power
• Molded polypropelyne cone with UV butyl rubber surround adds additional strength in high SPL applications
• Round, reinforced dust cap adds necessary weight to the mechanical function of the woofer & keeps the cone rigid
• Stamped steel basket allows for additional strength during high volume bass passages to avoid flex in the frame
• Front & rear venting allows cooler air to be exchanged in the voice coil gap which helps the subwoofer make deep bass & extend the life of the component
• Polyester & cotton-blended spider resists softening & sagging over time
• Nickel plated push & insert terminals resist corrosion & aid in easy installation
• Designed for small sealed & medium to large ported (vented) enclosures
• 12"
• 600W max/300W RMS
• Cutout: 11"
• Mounting depth: 5.59"
• Outside dia: 12.19
• Mounting height with grille & gasket: 6.1"

• High-temperature, dual 4Ω voice coils handle more power
• BASS-TEK engineered cone minimizes flex & increase deep bass power
• High-energy Y30 motor assembly for higher output with minimal amp power
• UV rubber surround resists sun fading & remains flexible
• Round, reinforced dust cap adds necessary weight to the mechanical function of the woofer & keeps the cone rigid
• Polyester & cotton-blended spider resists softening & sagging over time
• Stamped steel basket allows for additional strength during high volume bass passages to avoid flex in the frame
• Front & rear venting allows cooler air to be exchanged in the voice coil gap which helps the subwoofer make deep bass & extend the life of the component
• Stainless push & insert terminals for a very secure electrical connection with a high-end fit & finish
• Designed for small sealed & medium to large ported (vented) enclosures
• 10"
• 800W max/400W RMS
• Cutout: 9.25"
• Mounting depth: 5.25"
• Outside dia: 10.9"
• Mounting height with grille & gasket: 5.75"
• Each

• High-temperature, dual 4Ω voice coils handle more power
• BASS-TEK engineered cone minimizes flex & increase deep bass power
• High-energy Y30 motor assembly for higher output with minimal amp power
• UV rubber surround resists sun fading & remains flexible
• Round, reinforced dust cap adds necessary weight to the mechanical function of the woofer & keeps the cone rigid
• Polyester & cotton-blended spider resists softening & sagging over time
• Stamped steel basket allows for additional strength during high volume bass passages to avoid flex in the frame
• Front & rear venting allows cooler air to be exchanged in the voice coil gap which helps the subwoofer make deep bass & extend the life of the component
• Stainless push & insert terminals for a very secure electrical connection with a high-end fit & finish
• Designed for small sealed & medium to large ported (vented) enclosures
• 12"
• 1,000W max/500W RMS
• Cutout: 11.06"
• Mounting depth: 5.6"
• Outside dia: 12.19"
• Mounting height with grille & gasket: 6.1"
• Each

• 800W max
• 250W RMS
• 10" IMPP woofer cone
• Multicolor RGB LED lighting
• Water ingress protection (IP55)
• Dual 2Ω
• High-impact ASA plastic basket
• Male waterproof connectors built into basket
• Meets or exceeds ASTM D4329 (UV exposure) & ASTM B117 (Salt fog exposure)
• Mounting hole dia: 8.66"
• Mounting depth: 5.04"
• Includes both silver & black grilles, waterproof connectors for speaker & RGB lighting & stainless steel mounting hardware
• Each

• 1,000W max
• 300W RMS
• 12" IMPP woofer cone
• Multicolor RGB LED lighting
• Water ingress protection (IP55)
• Dual 2Ω
• High-impact ASA plastic basket
• Male waterproof connectors built into basket
• Meets or exceeds ASTM D4329 (UV exposure) & ASTM B117 (Salt fog exposure)
• Mounting hole dia: 10.71"
• Mounting depth: 5.45"
• Includes both silver & black grilles, waterproof connectors for speaker & RGB lighting & stainless steel mounting hardware
• Each

• 8" slim marine woofer • RCA low-level input • High-level input • Green & red LED power status indicator • Remote level control • 0° or 180° phase-shift switch • .2V–3V adjustable input sensitivity • 0dB–12dB+ variable bass boost @ 45Hz • 50Hz–150Hz low-pass filter • Soft delay remote turn-on • Thermal, short & overload protection circuits • 2 x 15A fuse • 600W max power • Dim: 3"H x 14.5"W x 9.5"D • Weight: 10.5lbs

• 100W
• Woofer & tweeter bridge fixed at a 15° angle
• 6.5" polypropylene woofer
• 1" pivoting silk dome tweeter
• Freq resp: 45Hz–20kHz
• Imp: 8Ω
• Sensitivity: 91dB @ 1W/1m
• Includes thin-bezel grille held by neo magnets
• Dim: 9.25" dia x 4.56"D
• Ceiling cutout: 8.25" dia
• Each

• 100W
• Woofer & tweeter bridge fixed at a 15° angle
• 6.5" graphite woofer
• 1" pivoting silk dome tweeter
• Freq resp: 45Hz–20kHz
• Imp: 8Ω
• Sensitivity: 91dB @ 1W/1m
• Includes thin-bezel grille held by neo magnets
• Dim: 9.25" dia x 5"D
• Ceiling cutout: 8.25" dia
• Each