Vhf Antenna

• Freq range: Pre-tuned 150MHz–162MHz VHF 1/4 wave antenna
• 18” tall black finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low loss premium coaxial cable with UHF male PL-259 connector installed 
• Stainless steel L-bracket with black finish for trunk groove or side mounting
• Can be mounted in 3/4" hole 

• Pretuned for all marine band frequencies
• Extra-long range
• 6dBd gain
• 15ft RG58 coax with PL-259 connector
• Nylon ratchet mount with stainless steel hardware for easy lay-down adjustment
• Heavy-duty fiberglass construction
• Packaged in tube for easy individual shipping

• 3dBd gain VHF
• 38 3/4" stainless steel whip
• Covers AIS (automatic identification system), all marine band & GPS frequencies
• VHF wideband 156MHz–162.2MHz with VSWR<1.3:1
• 1/2 wave
• High-power rating of 150W
• VHF has 23ft RG58 low-loss cable with FME connector for small hole installation
• VHF comes with UHF male PL-259 adapter
• GPS 30dB gain
• Active
•  Min 2.5V, max 5.5V
• GPS has 23ft RG58 low-loss cable with FME connector for small hole installation
• GPS comes with BNC-male, TNC-male & SMA-male adapters for all GPS applications
• Antenna is 1"-24 thread mounting for standard marine mounting
• Includes nylon ratchet mount for easy lay down

• Covers all marine band frequencies
• Base-loading coil
• 35" stainless steel whip
• Gain: 6dB
• Stainless steel L-bracket for side or mast mounting
• 15ft RG58A/U coaxial cable with PL-259

• Heavy-duty thick stainless steel “L” bracket for side or mast mounting plus hardware for rail mounting• Covers all marine-band frequencies• 6dB gain   • 38" tall• 15ft low-loss RG58A/U coaxial cable with PL-259

• Covers amateur & commercial land mobile frequencies
• Freq range: 140MHz–170MHz VHF unity gain/430MHz–470MHz UHF 2.5dBd gain
• 18 1/2” tall black finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low-loss premium coaxial cable with UHF male PL-259 connector installed 
• Stainless steel L-bracket with black finish for trunk groove or side mounting
•  Can be mounted in 3/4" hole 

• 58" tall
• Freq range: 134MHz–184MHz
• 4.5dBd gain
• Heavy-duty fiberglass construction
• Imp: 50Ω
• UHF female (SO-239) connector
• Mast dia accepted: 1.81" x 2.44"
• Includes bracket & three 20.5" stainless steel radials

• 135MHz–174MHz frequency range
• 5MHz bandwidth
• 6dBd gain
• 5/8 over 5/8 wave
• 3 stainless steel 20 1/2" radials
• Vertical polarized
• SO-239 UHF female connector
• 50Ω
• 200W
• 10ft

• 136MHz–150MHz VHF 2.14dBi gain• 400MHz–470MHz UHF 3dBi gain• 800MHZ–960MHz 3dBi gain• 100MHz–1300MHz 3dBi gain• 16 1/2" tall• Replaceable whip with brass set screw• 1 1/4" black finish mini-magnet base• 10ft RG174 cable with BNC-male connector installed

• 8.3dBd gain VHF 144MHz–148MHz
• 11.7dBd gain UHF 430MHz–450MHz
• 17ft tall
• Omnidirectional
• Heavy-duty fiberglass construction
• 3 sections
• Imp: 50Ω
• UHF female (SO-239) connector
• Mast diameter accepted: 1 3/16" x 2 7/16"
• Includes mounting bracket & 3 stainless steel radials 20 1/2"

• Covers all marine band frequencies
• Heavy-duty fiberglass construction
• Gain: 6dBd
• Stainless steel hardware
• Nylon ratchet mount for easy lay down
• 17ft RG58A/U coaxial cable with PL-259

• Covers all marine band frequencies
• Heavy-duty fiberglass construction
• Gain: 6dBd
• Stainless steel hardware
• Nylon ratchet mount for easy lay down
• 15ft RG58A/U coaxial cable with PL-259

• Covers all marine band frequencies
• 3dBd gain
• Heavy-duty fiberglass construction
• Complete with nylon ratchet mount for easy lay down
• Stainless steel hardware
• 20ft RG58 cable
• Easy screw-off PL-259 connector for small hole installation

• Covers AIS band & all VHF marine band frequencies
• Premium base loading coil with triple chrome-plated brass bass & top
• 2.5dBd gain
•  1/2 wave
• No ground plane
•  39.75" tall
•  36.25" stainless steel whip
• 15ft low loss RG-58A/U coaxial cable with a PL-259 on each end
• Stainless steel L-bracket for side or mast mounting

• 3dBd gain
• Covers all marine band frequencies
• Rail mount design
• 35" stainless steel .200" heavy-duty thick stiff whip
• Whip will not lay over in high wind
• 15ft RG58A/U low loss premium coaxial cable with PL-259s

• 4.1dBd gain
• 52" tall
• Super-duty 1" fiberglass
• Covers AIS (automatic identification system) & all marine band frequencies plus 150MHz–155MHz VHF land mobile
• SWR<1.3:1 @ 156MHz–162MHz marine band
• SWR<1.5:1 @ 150MHz–155MHz land mobile band
• 6/8 wave
• High power rating of 150W
• 21ft low-loss RG58 cable with FME-female connector for small hole installation
• Antenna is 1"-24 thread mounting hole for standard marine mounting
• Includes UHF-male PL-259 adapter & nylon ratchet mount for easy lay down

• 3dBd gain
• 39" stainless steel whip
• Covers AIS (automatic identification system) & all marine band frequencies
• VHF wideband 156MHz–162.2MHz with VSWR<1.3:1
• 1/2 wave
• High-power rating of 150W
• 23ft RG58 low-loss cable with FME-female connector for small hole installation
• Includes UHF male PL-259 adapter
• Antenna is 1"-24 thread mounting for standard marine mounting
• Includes nylon ratchet mount for easy lay-down

• Wideband reception covering 25MHz–1,300MHz
• Transmit bands 144MHz/220MHz/440MHz/900MHz/1,290MHz
• Rust-free stainless steel structure
• 200W max power
• SWR <1.5:1
• 1 3/8" max mast dia
• UHF female 20-239 connector
• 8 lower radials 32 3/4"
• 8 upper radials 11 1/4"

• 3dBd gain
• Antenna can be removed or replaced from mount without having to remove the cable from the boat after being installed 
• Heavy-duty fiberglass construction 
• Covers all marine band frequencies
• Complete with nylon ratchet mount for easy lay-down 
• Coaxial cable is built in to ratchet mount
• 20ft RG58/U low-loss premium coaxial cable
• Easy screw-off PL-259 connector for small hole installation

• 3dBd gain
• Antenna can be removed or replaced from mount without having to remove the cable from the boat after being installed 
• Heavy-duty fiberglass construction 
• Covers all marine band frequencies 
• Complete with nylon ratchet mount for easy lay-down 
• Coaxial cable is built into ratchet mount
• 17ft RG58/U low loss premium coaxial cable
• Easy screw-off PL-259 connector for small hole installation 

• 3dBd gain
• Covers all marine band frequencies
• Stainless steel L-bracket
• Stainless steel easy-twist quick-disconnect whip
• 35" stainless steel .200" heavy-duty thick stiff whip
• Whip will not lay over in high wind
• 15ft RG58A/U low loss premium coaxial cable with PL-259s

• 46"
• 3dBd gain
• Heavy-duty fiberglass construction
• Covers all marine band frequencies
• Complete with lift & easy lay-down mount & includes leveling plate
• Stainless steel hardware
• 20ft RG58/U low loss premium coaxial cable
• Easy screw-off PL-259 connector for small hole installation 

• 3dBd gain
• Heavy-duty fiberglass construction
• Covers all marine band frequencies
• Stainless steel rail mount & hardware
• 17ft RG58/U low loss premium coaxial cable
• Easy screw-off PL-259 connector for small hole installation

• 3dBd gain
• Covers all marine band frequencies
• Stainless steel L-bracket
• 35" stainless steel .200" heavy-duty thick stiff whip
• Whip will not lay over in high wind
• 15ft RG58A/U low loss premium coaxial cable with PL-259s

• 3dBd gain
• Heavy-duty fiberglass construction
• Covers all marine band frequencies
• Complete with lift & easy lay-down mount & includes leveling plate
• Stainless steel hardware
• 17ft RG58/U low loss premium coaxial cable
• Easy screw-off PL-259 connector for small hole installation 

• 3dBd gain
• Covers all marine band frequencies
• Heavy-duty thick stainless steel L-bracket for side or mast mounting plus hardware for rail mounting
• Stainless steel easy-twist quick-disconnect whip
• 35" stainless steel .200" heavy-duty thick stiff whip
• Whip will not lay over in high wind
• 15ft RG58A/U low loss premium coaxial cable with PL-259s

• Freq: 150MHz–154MHz VHF/450MHz–470MHz UHF
• 2.5dBd gain VHF/4.5dBd gain UHF
•  Max power 50W
•  Extra-long whip for superior gain & wide bandwidth
•  28" tall
• 17ft RG58/U low loss premium cable with PL-259 connector

• Freq range: 144MHz–174MHz VHF NMO antenna
• 3dBd gain - 5/8 wave
• 51” tall black finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low loss premium coaxial cable with UHF male PL-259 connector installed 
• Stainless steel L-bracket with black finish for trunk groove or side mounting
• Can be mounted in 3/4" hole 

• 136MHz–150MHz VHF 2.14dBi gain• 400MHz–470MHz UHF 3dBi gain• 800MHZ–960MHz 3dBi gain• 100MHz–1300MHz 3dBi gain• 16 1/2" tall• Replaceable whip with brass set screw• 1 1/4" black-finish mini-magnet base• 10ft RG174 cable with SMA-male connector installed

• Freq range: Pre-tuned 144MHz–148MHz VHF 2.4dBd gain/430MHz–450MHz UHF 4.5dBd gain
• 37" tall chrome-finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low-loss premium cable with UHF male PL-259 connector 
• Stainless steel L-bracket with chrome finish for trunk groove or side mounting
•  Can be mounted in 3/4" hole 

• Covers amateur & commercial land mobile frequencies
• Freq range: Pre-tuned 140MHz–170MHz VHF unity gain/430MHz–470MHz UHF 2.5dBd gain
• 18 1/2” tall black finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low-loss premium coaxial cable with SMA-female connector 
• Stainless steel L-bracket with black finish for trunk groove or side mounting
•  Can be mounted in 3/4" hole 

• Covers amateur & commercial land mobile frequencies
• Freq range: Pre-tuned 140MHz–170MHz VHF unity gain/430MHz–470MHz UHF 2.5dBd gain
• 18 1/2” tall black finish NMO mounting antenna with gold-plated plunger-type contact pin
• Solid brass NMO mount with gold-plated brass contact pin & high-frequency, fully enclosed, fully shielded & fully weatherized zinc die-cast housing 
• 17ft RG58/U low-loss premium coaxial cable with SMA-male connector installed 
• Stainless steel L-bracket with black finish for trunk groove or side mounting
•  Can be mounted in 3/4" hole