PAC® Stereo Remote Level Controller, LC1
Petra SKU:
PACLC1
Part No.:
133459
Vendor SKU:
LC-1
Retail Price:
$27.00
- Adds wired subwoofer level controls to any head unit
- Enables volume balance in any part of an amplified system; fine-tunes volume of any RCA line-level signal
- Compact housing means unit can be mounted, in dash, or under dash
- Includes remote mounting bracket
PAC® Remote Line Output Converter with Volume Control, LC-2
Petra SKU:
PACLC2
Part No.:
133460
Vendor SKU:
LC-2
Retail Price:
$34.00
- Converts speaker levels of a factory or aftermarket radio to RCA preamp levels while giving the user remote control over the amp volume
- Works with most factory or aftermarket radios
- Allows user to add a trunk-mounted amp for subwoofers
- Provides an additional set of preamp outputs from a head unit equipped with only 1 set
- Allows more control over a system's sound; cuts out subsonic frequency noise
- Adjusts head-unit output from 2 watts to 40 watts per channel
- Mounts in dash or under dash
PAC® Ground Loop Signal Isolator, SNI1
Petra SKU:
PACSNI1
Part No.:
133466
Vendor SKU:
SNI-1
Retail Price:
$21.00
- Eliminates ground loop noise between audio source and radio
- For use with portable devices that have RCA audio outputs, including preamp outputs
- Reduces most noise in RCA signal paths
- Enjoy ± 0.03 dB from 2 Hz to 20 kHz
- Utilizes proprietary audio transformer for a 1.3 dB gain
PAC® 2-Channel Adjustable Line-Out Converter, SNI-35
Petra SKU:
PACSNI35
Part No.:
133467
Vendor SKU:
SNI-35
Retail Price:
$25.00
- For use when adding an amp to a factory radio to convert radio's speaker level output to the lower level RCA input
- For use with radios with 2 watts RMS to 40 watts RMS of output per channel
- 50 watts maximum input per channel; both output channels are adjustable
- Linear 20 to 20 kHz output based on the input signal; rolls off below 20 Hz for subsonic reduction
- Transformer isolated for optimal sound and performance
- Maintains correct phasing
- Works with most factory-installed radios
PAC® TR4 Programmable Universal Low-Voltage Trigger Module
Petra SKU:
PACTR4
Part No.:
133469
Vendor SKU:
TR-4
Retail Price:
$22.00
- For use in any aftermarket amp installation where a remote turn-on is needed
- For adding a subwoofer and amp to a factory system
- Senses voltages as low as .8 volts and provides a 12-volt output with a 1-second delay that eliminates turn-on pops
- Uses a speaker lead or +5 remote wires
PAC® 2-Channel Adjustable High-Power Line-Output Converter
Petra SKU:
PACSNI50A
Part No.:
186424
Vendor SKU:
SNI-50A
Retail Price:
$29.00
- 50 watt max input per channel
- Frequency response: 20 Hz to 20 kHz
- Transformer isolated for optimal sound and performance
- Maintains correct phasing
- Works with most factory-installed radios
- Detachable wiring harness
- Integrated wire-tie mount
PAC® RadioPRO4 Radio Replacement Interface for Select Chrysler®/Dodge®/Jeep®/Ram® Vehicles, RP4-CH11
Petra SKU:
PACRP4CH11
Part No.:
208223
Vendor SKU:
RP4-CH11
Retail Price:
$239.00
- All-in-one radio replacement and steering wheel control interface
- Preloaded with amp-retention and SWC software
- Retains steering wheel controls (pre-programmed); retains factory amplifier
- Provides factory RSE activation
- 12-volt ACC output (RAP)
- Vehicle Speed Sense (VSS), illumination, and reverse trigger
- Parking brake output
- Does not retain Uconnect or blind spot detection system; CHYRVD harness required (sold separately to retain factory reverse camera and VES
- In Premium Amplified Systems, only 2 input channels can be used from the aftermarket radio, therefore there will be no fading capability of aftermarket stereo
- Compatible with all trim levels of Chrysler 200 2011 through 2014, 300 2005 through 2010, Aspen 2007 through 2009, PT Cruiser and Sebring 2007 through 2010, and Town & Country 2008 through 2016
- Compatible with all trim levels of Dodge Avenger 2007 through 2014, Caliber 2006 through 2012, Challenger 2008 through 2014, Charger 2006 through 2010, Durango 2004 through 2013, Grand Caravan 2009 through 2016, Journey 2009 through 2010, Magnum 2005 through 2008, Nitro 2007 through 2010, Raider 2006 through 2008, and Ram 2006 through 2012
- Compatible with Jeep Compass 2007 through 2016, Grand Cherokee 2005 through 2013, Liberty 2008 through 2013, Patriot 2007 through 2016, Wrangler 2007 through 2017, Wrangler JK 2018, Wrangler Unlimited JK 2007 through 2017, and Wrangler Unlimited JK 2018
- Compatible with Mitsubishi Raider 2009, Ram Truck 2010 through 2012, and Volkswagen Routan 2009 through 2013
PAC® RadioPRO4 Radio Replacement Interface for Ford® Vehicles with CANbus
Petra SKU:
PACRP4FD11
Part No.:
208224
Vendor SKU:
RP4-FD11
Retail Price:
$239.00
- All-in-one radio replacement and steering wheel control interface
- Preloaded with amp-retention and SWC software
- Navigation-based output signals
- Retains steering wheel controls (pre-programmed)
- Data controlled accessory and navigation outputs
- Retains factory amplifier
- Retains Rear Seat Controls
- Provides factory RSE activation
- Retains 12-volt ACC output (RAP), Vehicle Speed Sense (VSS), illumination, reverse trigger, and parking brake output
- Does not retain SYNC; SYNC retention requires MS-FRD, sold separately)
- Factory amplified systems will not fade as neither the aftermarket radio or the RP interface have the ability to control the amplifier's fader
- 2013 through 2014 F-150: Only compatible in base model trucks equipped with the center stack radio
- 2008 F-250/350/450: Not compatible with model trim XL (fleet vehicles); these vehicles do not have the necessary CANbus signals
- 2013 through 2016 Ford Super Duty: Only compatible in base model trucks equipped with double-DIN radio
PAC® RadioPRO4 Radio Replacement Interface for GM® Vehicles with GM LAN 29-Bit Databus, RP4-GM31
Petra SKU:
PACRP4GM31
Part No.:
208225
Vendor SKU:
RP4-GM31
Retail Price:
$239.00
- All-in-one radio replacement and steering wheel control interface
- Preloaded with amp-retention and SWC software
- Retains steering wheel controls (pre-programmed)
- Data controlled accessory and navigation outputs
- Retains factory amplifier and back-up sensors/park assist; provides factory RSE activation
- Rear seat audio and video (GMRVD) required (sold separately)
- 2012 through 2014 Avalanche, Sierra, Silverado Suburban, Tahoe, and Yukon: vehicles equipped with a navigation radio are not compatible; these vehicles must use the RP4-GM32 (sold separately); also does not retain OnStar, escalating tones of parking sensor proximity nor lane departure or forward collision warning tones
- Chevrolet Express vans and GMC Savannah vans equipped with diesel engines are not compatible
- Premium Factory amplified Systems will not fade as neither the aftermarket radio or the RP interface have the ability to control the amplifier's fader
- Compatible with Buick Enclave 2008 through 2017 and Lucerne 2006 through 2011 and Cadillac DTS 2006 through 2011, Escalade 2007 through 2014, Escalade ESV 2007 through 2014, Escalade EXT 2007 through 2014, and SRX 2007 through 2009
- Compatible with Chevrolet Avalanche 2007 through 2013, Equinox 2007 through 2008, Express Van 2008 through 2020, Impala 2006 through 2013, Impala Classic 2014 through 2016, Monte Carlo 2006 through 2007, Silverado Non-Classic 2007, Silverado 2008 through 2013, Suburban 2007 through 2014, Tahoe 2007 through 2014, and Traverse 2009 through 2017
- Compatible with GMC Acadia 2007 through 2016, Acadia Classic 2017, Savana 2008 through 2020, Sierra Non Classic 2007, Sierra 2008 through 2013, Sierra HD 2007 through 2013, Yukon 2007 through 2014, and Yukon XL 2007 through 2014
- Compatible with Hummer H2 2008 through 2009, Pontiac Torrent 2007 through 2009, Saturn Outlook 2007 through 2009 and Vue 2008 through 2009 , and Suzuki XL-7 2007 through 2008
PAC® RadioPRO5 Radio Replacement Interface for Select GM® Vehicles, RP5-GM31
Petra SKU:
PACRP5GM31
Part No.:
221719
Vendor SKU:
RP5-GM31
Retail Price:
$289.00
- All-in-one radio replacement and steering wheel control interface
- Preloaded with amp-retention and SWC software; compatible with non-amplified audio systems
- Retains OnStar and functions when factory radio is replaced
- Retains steering wheel controls (pre-programmed), factory Bluetooth (2009+ model vehicles), rear seat audio controls, and factory satellite radio with text displayed in the Driver Information Center (cluster display)
- Retains all warning chimes (chime module included), back-up sensors/park assist, and back-up camera signal, factory Bose and premium Bose audio systems (Y91 digital system does not support fading from aftermarket radio)
- Dual-zone function and chime volume adjustment; rear seat audio and video (GMRVD) required (sold separately)
- Retains accessory power output (RAP), VSS (Vehicle Speed Sense) output, illumination output, parking brake output, and reverse wire output
- 2012 through 2014 Avalanche, Sierra, Silverado Suburban, Tahoe and Yukon: vehicles equipped with a navigation radio are not compatible
- 2014+ Silverado and Sierra: only compatible with 2500 and 3500 series trucks with non-navigation radios
- In Premium Amplified Systems, there will be no fading capability of the aftermarket stereo
- Chevrolet Express vans and GMC Savannah vans equipped with diesel engines are not compatible
- In order to retain factory XM tuner, the aftermarket head unit MUST be equipped with an auxiliary input and the vehicle must be equipped with steering wheel controls and a driver information center
- Sony Bluetooth SWC commands are only supported with revision 1.6.6.14 or higher; does not retain escalating tones of parking sensor proximity, lane departure, or forward collision warning tones
- Includes antenna adapter
PAC® Video Lockout Bypass Trigger Module, TR1
Petra SKU:
PACTR1
Part No.:
296010
Vendor SKU:
TR1
Retail Price:
$25.00
- Preprogrammed for compatibility with popular double-DIN radio models from Alpine, Pioneer, Kenwood, and more
- Enables access to video playback
- Extremely compact for easier install
- Includes harness
PAC® ControlPRO2 Universal Analog/CANbus Steering Wheel Control Interface with Web- and App-Supported Installation
Petra SKU:
PACSWICP2
Part No.:
322100
Vendor SKU:
SWI-CP2
Retail Price:
$119.00
- Easy to use and time saving
- Works on analog (resistive) and data SWC systems
- Vehicle Configuration by DIP switch, vehicle lookup, and switch setting provided by ControlPRO Apps (PC, iOS, and Android) and by direct flash from ControlPRO Apps for PC (USB connection required)
- Button learning mode
- Customizable button functions
- Provides 2 amp, 12 volt ACC output (databus applications)
- Does not retain HVAC controls found in some GM vehicles
PAC® Adjustable Voltage Adapter, VOLT-39
Petra SKU:
PACVOLT39
Part No.:
326978
Vendor SKU:
VOLT-39
Retail Price:
$27.00
- Accepts input voltage from 10 volts to 24 volts; not for use in 24-volt systems
- 4-position switch selects desired voltage output: 3.3, 5, 6, or 9; no programming required
- 3.3 volts for some cameras as a replacement power supply
- 5 volts uses include turning amp on in older Ford vehicles
- 6 volts for OE reverse camera retention
- 9 volts for use with a wide range of devices that run on 9 volts such as portable navigation units, radar detectors, etc.
PAC® Radio Replacement Adapter for Select 2007 to 2017 Dodge®/Chrysler®/Jeep®/Ram®/Volkswagen Vehicles, LCCH21
Petra SKU:
PACLCCH21
Part No.:
337168
Vendor SKU:
LCCH21
Retail Price:
$105.00
- For select vehicles with nav outputs, with or without premium audio systems
- Provides RAP 12-volt accessory output
- SWI-DIRECT steering wheel control connection
- Compatible with both amplified and non-amplified factory audio systems
- VSS (Vehicle Speed Sense) output
- Parking brake output
- Reverse output
- Retains rear-seat entertainment system (with CHYRVD, sold separately)
- Compatible with Chrysler 200 2011 through 2014, 300 2008 through 2010, Aspen 2008 through 2009, Sebring 2007 through 2010, and Town & Country 2008 through 2016
- Compatible with Dodge Avenger 2007 through 2014, Caliber 2010 through 2012, Challenger 2008 through 2014, Charger 2008 through 2010, Durango 2008 through 2013, Grand Caravan 2009 through 2016, Journey 2009 through 2010, Magnum 2008, Nitro 2007 through 2010, and Ram Truck 2009 through 2012
- Compatible with Jeep Compass 2009 through 2016, Grand Cherokee 2008 through 2013, Liberty 2008 through 2013, Patriot 2008 through 2016, Wrangler 2007 through 2017, Wrangler JK 2018, Wrangler Unlimited 2007 through 2017, and Wrangler Unlimited JK 2018
- Compatible with Ram Truck 2010 through 2012
- Compatible with Volkswagen Routan 2009 through 2023
PAC® Reverse Camera Harness for Select 2014 to 2019 GM® Vehicles, CAM-GM51
Petra SKU:
PACCAMGM51
Part No.:
341304
Vendor SKU:
CAM-GM51
Retail Price:
$24.00
- Provides plug and play connection and retention of the original reverse camera
- Male RCA video output connection
- Saves install time
- Prevents cutting of the factory video input harness
- For select 2014 to 2019 GM vehicles
- Compatible with Buick Encore 2015 through 2016, Envision 2017, Lacrosse 2016, and Regal 2014 through 2015
- Compatible with Cadillac ATS 2015 through 2016, CTS 2014 through 2015, Escalade 2015, SRX 2015 through 2016, and XT5 2017
- Compatible with Chevrolet Camaro with 8-in. screen (IO5/IO6) 2016 through 2018, Colorado 2015 through 2016, Cruze 2016, Impala 2014 through 2016, Malibu Non Classic 2016, Malibu with 8-in. screen (IO5/IO6) 2018, Silverado 2014 through 2016, Silverado with 8-in. screen (IO5/IO6)2017 through 2018, Silverado Classic with 8-in. screen (IO5/IO6) 2019, Silverado HD 2014 through 2016, Silverado HD with 8-in. screen (IO5/IO6) 2017 through 2018, Spark 2015, Suburban 2015 through 2019, and Tahoe 2015 through 2019
- Compatible with GMC Acadia with 8-in. screen (IO5/IO6) 2017, Canyon 2015 through 2016, Sierra 2014 through 2016, Sierra with 8-in. screen (IO5/IO6) 2017 through 2018, Sierra HD 2015 through 2016, Sierra HD with 8-in. screen (IO5/IO6) 2017 through 2018, Yukon 2015 through 2019, and Yukon XL 2015 through 2019
PAC® Reverse Camera Harness (For Select Nissan® Vehicles with 4.3-Inch Radio Display)
Petra SKU:
PACCAMNI1
Part No.:
341305
Vendor SKU:
CAM-NI1
Retail Price:
$59.00
- Provides ability to add a backup camera to factory radios on select Nissan vehicles with 4.3 in. radio display
- Simple plug and play installation
- Female RCA video output connection
- For 2010 to 2015 Nissan Altimas, 2013 to 2016 Frontiers, 2015 Jukes, 2013 to 2015 Leafs, 2011 to 2015 Rogues, 2010 to 2015 Sentras, 2013 to 2015 Titans, 2014 to 2015 Versa/Versa Notes, all trim levels
- For 2011 to 2017 Nissan Quests, all trim levels, non Bose
- Compatibility note: Requires vehicles with 4.3 in. factory radio display and the addition of a backup camera (sold separately); Not compatible in vehicles equipped with navigation
PAC® Factory ANC Module Bypass Harness for Select Chrysler®, Jeep®, and Ram® Vehicles, ANC-CH01
Petra SKU:
ANC-CH01
Part No.:
341300
Vendor SKU:
ANC-CH01
Retail Price:
$37.00
- Quickly and easily bypass the factory ANC Module (Active Noise Canceling)
- Compatible with 2017 to 2019 Chrysler Pacifica, all trim levels
- Compatible with 2019 Dodge Ram trucks, Non Classic
- Compatible with 2019 Jeep Cherokees and 2015 to 2016 Jeep Grand Cherokees, all trim levels
- Compatible with 2019 Ram trucks, Non Classic
- Keeps ANC module on databus for vehicle diagnostics health
- Factory-fit plug-in connectors
- Prevents cutting of factory wires for faster installation and plug-and-play solution
PAC® AmpPRO 4 Amp Integration Interface for Select 2014-2019 GM® Vehicles with Factory-Amplified Bose® Sound Systems, AP4-GM61
Petra SKU:
PAAAP4GM61
Part No.:
396973
Vendor SKU:
AP4-GM61
Retail Price:
$489.00
- Provides factory sound system upgrade solution for factory, fixed-level, databus-controlled sound systems
- Compatible with all trim levels of Cadillac ATS 2015, CT6 2017, and Escalade 2015-2019; Chevrolet Camaro 2016-2018, Colorado 2015-2018, Corvette 2014-2019, Cruze 2017-2018, Equinox 2018, Impala 2014-2016 (non-Classic), Impala 2017-2019, Malibu 2016 (non-Classic), Malibu 2017-2018, Silverado 2014-2018, Silverado 2019 (Classic), Silverado HD 2015-2019, Suburban 2015-2019, Tahoe 2015-2019, Traverse 2018-2019, and Volt 2016-2018
- Compatible with all trim levels of GMC Acadia 2018-2019, Canyon 2015-2018, Sierra 2014-2018, Sierra HD 2015-2019, Terrain 2018, and Yukon/Yukon XL 2015-2019
- Time-saving design prevents need for summing and DSP devices
- Retains original radio's fit, finish, and features
- Provides full range, flat audio output for a solid audio foundation
- Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
- Customized OE bass, mid and treble center frequency selection
- Front, rear, and sub preamp outputs (5 volts RMS)
- Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes
- Plug and play installation with factory-matched harness
- Includes sub level controller, TOSLINK output, knob harness, harness, and manual
PAC® AmpPRO 4 Amplifier Integration Interface for Select 2013 to 2024 Chrysler®, Dodge®, Jeep®, and Ram® Vehicles, AP4-CH41 (R.2)
Petra SKU:
PAAAP4CH41R2
Part No.:
348982
Vendor SKU:
AP4-CH41 (R.2)
Retail Price:
$379.00
- Compatible with both amplified and nonamplified factory systems but Jeep Cherokee, Chrysler 200, and Maserati must have a factory amplifier while others without a factory amp must add an amp to the vehicle speakers
- Compatible with Jeep Wrangler/Gladiator all screen sizes; all other models must have 7 in. or 8 in. screen; not 5 in. screen
- Nonamplified vehicles with ANC (Active Noise Cancellation) require the ANC module to be bypassed
- Compatible with Chrysler 200 2015 to 2017, 300 2015 to 2019, and Pacifica 2017 to 2019, Dodge Challenger and Charger 2015 to 2022, Durango 2014 to 2020, and Durango 2021 8.4-in. and 10.1-in. screens
- Compatible with Jeep Cherokee 2015 to 2021, Gladiator 2020 to 2022, Gladiator 2020 to 2022 Grand Cherokee 2014 to 2021, Wrangler JL /Wrangler Unlimited 2018 to 2023, Wrangler 4XE 2021 to 2022, Wrangler/Wrangler Unlimited 2024, and Maserati Levante 2018 and Quattroporte 2017
- Compatible with Ram Truck 2013 to 2021 and Non-Classic 2022
- Upgrade solution for factory, fixed level, databus-controlled sound systems
- Timesaving design prevents need for summing and audio correction devices-plug and play installation
- Variable volume, fade, balance, bass, mid, and treble audio settings,
- Retains uConnect, Bluetooth audio, navigation prompts, and all warning chimes
- Front, rear, sub, and center channel preamp outputs (5-volt RMS)
- Provides full range, flat audio output for a solid audio foundation
- Customized OE bass, mid, and treble center frequency selection
- Optional TOSLINK optical output (sold separately)
- Includes remote sub level controller, interface, and harnesses
PAC® 6 ch Amplifier Integration Interface for Select Ford & Lincoln Vehicles with Factory Amplified Sound Systems
Petra SKU:
PAAAP4FD21
Part No.:
396971
Vendor SKU:
AP4-FD21
Retail Price:
-
PAC® 12-In. Dash-Mount USB Extension, USBDMA1
Petra SKU:
PAAUSBDMA1
Part No.:
395015
Vendor SKU:
USBDMA1
Retail Price:
$16.00
- USB extension cable makes rear USB input of aftermarket head unit more accessible
- Universal fit
- End is dash mountable for OEM look
- 12 in.
PAC® Radio Replacement Interface for 1998–2013 Harley-Davidson® Motorcycles
Petra SKU:
PACHDK001X
Part No.:
296012
Vendor SKU:
HDK001X
Retail Price:
$157.95
- Compatible with select 1998-2013 Harley-Davidson motorcycles with factory fairings
- Aftermarket radio must be equipped with a wired remote input (3.5 mm headphone style jack or Blue/Yellow wire) in order to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont etc.)
- Retains handlebar audio controls; does not retain rear speakers; pre-programmed radio-specific handlebar functions
- Simplified prewired installation harness eliminates need to cut any of the bike's wires
- Not compatible with any Sony XAV series head unit
- Not compatible with Alpine models UTE-73BT, CDE-172BT, CDE-173BT, and CDE175BT
- Not compatible with KENWOOD models KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U, and KDC-X798
- Clarion model CZ500 does not support remote Bluetooth controls
- JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
- Pioneer AVIC-Fxxx radios do not interpret radio preset seeking commands; this is a limitation of the radio not the SWI-RCT; Pioneer radios with Bluetooth feature, the steering wheel controls will not adjust the phone call volume; phone call volume must be adjusted on the face of the radio
- Only the AVIC-Z110BT, Z120BT, Z130BT, and Z140BH and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input
- Includes dash kit with optional foul weather and UV cover and step-by-step instruction manual
PAC® RadioPRO5 Radio Replacement Interface for Select 2000 through 2013 GM® Vehicles, RP5-GM11
Petra SKU:
PACRP5GM11
Part No.:
235083
Vendor SKU:
RP5-GM11
Retail Price:
$249.00
- All-in-one radio replacement and steering wheel control interface
- Compatible with non-amplified audio systems
- Retains OnStar and functions when factory radio is replaced
- Retains steering wheel controls (pre-programmed); does not retain climate steering wheel controls
- Retains factory Bluetooth (2009+ model vehicles), retains rear seat audio controls, all warning chimes (chime module included), and back-up sensors/park assist
- Retains factory Bose and premium Bose audio systems; does not retain fade in digital systems
- Chime volume adjustment (factory buttons), Rear Seat Entertainment retention, retained accessory power output (RAP), reverse wire output, and VSS (Vehicle Speed Sense) output
- Illumination output and parking brake output
- Includes antenna adapter
- Compatible with Buick Century 2004 through 2005, Lacrosse 2005 through 2007, Rainier 2004 through 2007, Rendezvous 2003 through 2007, and Terraza 2005 through 2007; and Cadillac Escalade 2003 through 2006, Escalade ESV 2003 through 2006, and Escalade EXT 2003 through 2006
- Compatible with Chevrolet Avalanche 2003 through 2006, Cavalier 2000 through 2005, Colorado 2004 through 2011, Corvette 2005 through 2013, Express Van 2004 through 2007, Impala 2000 through 2005, Malibu 2001 through 2003, Monte Carlo 2000 through 2005, S-10 Pickup 2003 through 2004, Silverado 2003 through 2006, Silverado Classic 2007, SSR 2003 through 2006, Suburban 2003 through 2006, Tahoe 2003 through 2006, Trailblazer 2002 through 2009, Uplander 2005 through 2008, and Venture 2003 through 2005
- Compatible with GMC Canyon 2004 through 2011, Envoy 2002 through 2009, Savana 2003 through 2007, Sierra 2003 through 2006, Sierra Classic 2007, Yukon 2003 through 2006, and Yukon XL 2003 through 2006; and Hummer H2 2003 through 2007, H3 2005 through 2010, and H3T 2009 through 2010
- Compatible with Isuzu Ascender 2003 through 2008; Oldsmobile Alero 2001 through 2004, Bravada 2002 through 2004, and Silhouette 2000 through 2004; Pontiac Aztek 2001 through 2005, Grand Am 2001 through 2005, Grand Prix 2004 through 2008, Montana 2000 through 2006, and Sunfire 2000 through 2005; Saab 9-7X 2005 through 2008, and Saturn Relay 2005 through 2007
PAC® RadioPRO3 GM11 Radio Replacement Interface for Select GM® Class II and 24-Pin Vehicles
Petra SKU:
PACRP3GM11
Part No.:
245209
Vendor SKU:
RP3-GM11
Retail Price:
$135.00
- High-current 10A accessory output
- Data-controlled outputs for connection to navigation radio-speed, reverse & E-brake status output wires
- Retains factory-installed amp (if equipped)
- Data-controlled RAP accessory output
- Keeps vehicle databus intact for service
- Plug-in connection for steering wheel control module (SWI-RC or SWI-X)
- Adjustable chime volume: 4 levels & off
- Interface can be quickly updated if needed from PAC website using PAC-UP USB adapter
- Includes RadioPro3 module, plug & play vehicle connection harness & instruction manual
- For GM vehicles with Class II databus & 24-pin harness
PAC® Radio Replacement Interface for Select Nonamplified GM® 29-Bit LAN v2 Vehicles with 20-Pin and 16-Pin Harnesses
Petra SKU:
PACLCGM51
Part No.:
273739
Vendor SKU:
LCGM51
Retail Price:
$85.00
- Retains all safety warning chimes when factory radio is replaced
- Provides 10-min RAP accessory output
- Retain factory reverse camera when used in conjunction with CAM-GM51 (sold separately)
- Compatible with select 2014 through 2019 Buick, Cadillac, Chevrolet, and GMC vehicles
- Interface can be quickly updated if needed from PAC website using PAC-UP USB adapter
- Includes LCGM51 module, plug and play vehicle connection harness, and instruction manual
PAC® AmpPRO 4 Amp Integration Interface for Select 2010–2014 Ford® and Lincoln® Vehicles with Factory-Amplified Sony® Sound Systems, AP4-FD11
Petra SKU:
PAAAP4FD11
Part No.:
396970
Vendor SKU:
AP4-FD11
Retail Price:
$379.00
- Provides factory sound system upgrade solution; can be used to upgrade entire sound system or just part of it thanks to retention of original amp; enables addition of subwoofer system to original sound system
- Compatible with all trim levels of Ford F-150 2009-2012, Flex 2009-2012, Fusion 2010-2012, and Taurus 2010-2012
- Compatible with all trim levels of Lincoln MKS 2009-2012, MKT 2010-2012, MKX 2007-2010, MKZ 2007-2012, and Navigator 2007-2014
- Simplifies amplifier installation in databus-controlled factory sound systems
- Prevents need for summing and DSP devices
- Retains original radio's fit, finish, and features
- Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
- Provides solid audio foundation with flat audio output
- Front, rear, and sub preamp outputs (5 volts RMS)
- Retains SYNC, Bluetooth, navigation prompts (if equipped), and all warning chimes
- Plug and play installation with factory-matched harness
- Includes sub level controller, knob harness, 24-in harness, and manual
PAC® AmpPRO 4 Amp Integration Interface for Select 2018 and Up Ford® Vehicles with Factory-Amplified B&O A2B Sound Systems, AP4-FD31
Petra SKU:
PAAAP4FD31
Part No.:
396972
Vendor SKU:
AP4-FD31
Retail Price:
$489.00
- Can provide a pure digital audio output for use with amplifiers or audio processors equipped with a TOSLINK input
- Compatible with all trim levels of Ford Bronco 2021-2023, Bronco Sport 2021, Eco Sport 2021, Edge 2019-2022, Escape 2021-2022, Expedition 2018-2020, Explorer 2020-2023, F-150 2018-2023, F-250/350/450/550 2020-2023, Lightning 2022, Maverick 2022, Mustang Mach E 2021, and Ranger 2020-2023
- Simplifies amplifier installation in databus-controlled factory sound systems; connects at amp and not the radio
- Retains original radio's fit, finish, and features
- Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
- Front, rear, and sub preamp outputs (5 volts RMS)
- Retains Bluetooth, navigation prompts, warning chimes, and telematics audio (if equipped)
- Plug and play installation with factory-matched harness
- Includes sub level controller, knob harness, and manual; included harness provides connections for adding aftermarket amp to factory-installed speakers
PAC® AmpPRO SUB Advanced Amp Interface for Select 2007-2015 Chrysler®, Dodge®, Jeep®, and Ram® Factory-Amplified Sound Systems, APSUB-CH21
Petra SKU:
PAAAPSUBCH21
Part No.:
396974
Vendor SKU:
APSUB-CH21
Retail Price:
$159.00
- Time-saving design simplifies subwoofer amplifier installation in databus-controlled factory sound systems; integrates with factory radio
- Compatible with all trim levels of Chrysler Town & Country 2008-2016; Dodge Challenger 2008-2014, Charger 2008-2010, Durango 2009, 2011-2013, Grand Caravan 2008-2018, and Ram Truck 2009-2012; Jeep Grand Cherokee 2008-2013, Wrangler 2007-2017, Wrangler (JK) 2018, Wrangler Unlimited 2007-2017, and Wrangler Unlimited (JK) 2018; and Ram Truck 2010-2012
- Subwoofer preamp output (5 volts RMS)
- Retains warning chimes, navigation prompts, Bluetooth, and telematics audio (if equipped)
- Provides flat, low frequency audio output
- Customized OE bass center frequency selection
- Plug-and-play installation with factory-matched harness; no permanent modification of vehicle is needed
- Includes flush-mount sub level controller, harness, and amp installation adapter
PAC® L.O.C. Pro Advanced Audio Integration T-Harness for Select 2013 and up Non-Amplified Chrysler®, Dodge®, and Jeep® Vehicles, LPHCH41
Petra SKU:
PAALPHCH41
Part No.:
396978
Vendor SKU:
LPHCH41
Retail Price:
$59.00
- Simplifies audio equipment installation and provides all necessary high-level inputs and speaker outputs for aftermarket audio equipment; not for use in vehicles with a factory amplifier; vehicles equipped with standalone ANC module must bypass module before connecting this harness
- Compatible with all trim levels of Chrysler 200 2015-2017 and 300 2015-2023
- Compatible with all trim levels of Dodge Challenger 2015-2023, Charger 2015-2023, Durango 2014-2021 (not compatible in models with 10.1-in. screen), and Ram Truck 2013-2021
- Compatible with all trim levels of Jeep Cherokee 2015-2021, Compass 2018-2020, Gladiator 2020-2023, Grand Cherokee 2015-2021, Renegade 2015-2021, Wrangler JL 2018-2023, Wrangler 4XE 2021-2022, and Wrangler Unlimited JL 2018-2023
- Clearly labeled pigtail harnesses
- Front and rear speaker leads
- Includes 52-pin harness, pigtail harnesses, and instruction manual
PAC® L.O.C. Pro Advanced Audio Integration T-Harness for Select 2011 to 2020 Non-Amplified Ford® Vehicles, LPHFD21
Petra SKU:
PAALPHFD21
Part No.:
396979
Vendor SKU:
LPHFD21
Retail Price:
$59.00
- Simplifies audio equipment installation and provides all necessary high-level inputs and speaker outputs for aftermarket audio equipment; not for use in vehicles with a factory amplifier
- Compatible with all trim levels of Ford C-Max 2013-2017, Edge 2011-2020, Escape 2013-2019, Expedition 2015-2020, Explorer 2011-2019, F-150 2013-2020, F-250/350/450 2013-2018, Flex 2013-2019, Focus 2013-2018, Fusion 2013-2020, Mustang 2015-2020, and Taurus 2013-2019
- Clearly labeled pigtail harnesses
- Front and rear speaker leads
- Includes 24-pin harness, pigtail harnesses, and instruction manual
PAC® L.O.C. Pro Advanced Audio Integration T-Harness for Select 2018 to 2023 Non-Amplified Ford® Vehicles, LPHFD31
Petra SKU:
PAALPHFD31
Part No.:
396980
Vendor SKU:
LPHFD31
Retail Price:
$59.00
- Simplifies audio equipment installation and provides all necessary high-level inputs and speaker outputs for aftermarket audio equipment; not for use in vehicles with a factory amplifier
- Compatible with all trim levels of Ford Bronco and Bronco Sport 2021-2023, Eco Sport 2018-2022, Econoline Van 2021-2023, Escape 2020-2023, Expedition 2022-2023, Explorer 2020-2023, F-150 2021-2023, F-250/350/450/550 2020-2023, Lightning 2022-2023, Maverick 2022-2023, Mustang Mach E 2021-2023, Ranger 2020-2023, and Transit Connect 2019-2023
- Clearly labeled pigtail harnesses
- Front and rear speaker leads
- Includes 32-pin harness, pigtail harnesses, and instruction manual
PAC® L.O.C. Pro Advanced Audio Integration T-Harness for Select 2018 to 2023 Non-Amplified GM® Vehicles, LPHGM51
Petra SKU:
PAALPHGM51
Part No.:
396981
Vendor SKU:
LPHGM51
Retail Price:
$59.00
- Simplifies audio equipment installation and provides all necessary high-level inputs and speaker outputs for aftermarket audio equipment; not for use in vehicles with a factory amplifier
- Compatible with all trim levels of Buick Envision 2017, LaCrosse 2016, and Regal 2014-2015
- Compatible with all trim levels of Cadillac ATS 2015-2016, CTS 2014-2015, Escalade 2015, SRX 2015-2016, and XT5 2017
- Compatible with all trim levels of Chevrolet Camaro 2016-2018 (with 8-in. screen IO5/IO6), Colorado 2015-2016, Cruze 2016-2017, Impala Non-Classic 2014-2016 (with 8-in. screen IO5/IO6), Impala 2017-2019 (with 8-in. screen IO5/IO6), Malibu Non-Classic 2016, Malibu 2017-2018, Silverado 2014-2017, Silverado 2018 (with 8-in. screen IO5/IO6), Silverado Classic 2019 (with 8-in. screen IO5/IO6), Silverado HD 2015-2019, Sonic 2017, Spark 2015 and 2018; Suburban 2015-2019, and Tahoe 2015-2019
- Compatible with GMC Acadia 2017 (with 8-in. screen IO5/IO6), Canyon 2015-2016, Sierra 2014-2016, Sierra 2017-2018 (with 8-in. screen IO5/IO6), Sierra HD 2015-2017 and 2019, Yukon 2015-2019, and Yukon XL 2015-2017 and 2019
- Not compatible with RPO codes IOA or IOB
- Clearly labeled pigtail harnesses
- Front and rear speaker leads
- Includes 32-pin harness, pigtail harnesses, and instruction manual
PAC® AmpPRO 4 Amp Integration Interface for Select 2011–2020 Ford® Vehicles with 8.4-In. Radio and Factory-Amplified Sony® Sound Systems, AP4-FD21
Petra SKU:
PACAP4FD21
Part No.:
322099
Vendor SKU:
AP4-FD21
Retail Price:
$379.00
- Provides factory sound system upgrade solution; can be used to upgrade entire sound system or just part of it thanks to retention of original amp; enables addition of subwoofer system to original sound system
- Compatible with all trim levels of Ford Edge 2015-2017, Escape 2016, Expedition 2015-2017, Explorer 2011-2018, F-150 2013-2017, F-250/350/450/550 2013-2019 (Super Duty Trucks can have either Sony or B&O systems to be compatible), Focus 2012-2017, Fusion 2013-2016, Mustang 2019-2020 (must have B&O system to be compatible), and Taurus 2013-2015
- Simplifies amplifier installation in databus-controlled factory sound systems
- Prevents need for summing and DSP devices
- Retains original radio's fit, finish, and features
- Provides solid audio foundation with flat audio output
- Provides variable volume, control, fade, balance, bass, mid, and treble audio settings
- Customized OE bass, mid and treble center frequency selection
- Front, rear, and sub preamp outputs (5 volts RMS)
- Retains SYNC, Bluetooth, navigation prompts (if equipped), and all warning chimes
- Plug and play installation with factory-matched harness
- Includes sub level controller, knob harness, 24-pin and 54-in harness, and manual
PAC® RadioPRO4 TY111 Radio Replacement for Select Toyota® Vehicles
Petra SKU:
PACRP42TY11
Part No.:
291552
Vendor SKU:
RP4.2-TY11
Retail Price:
$249.00
- Radio replacement for 2001-2016 select Toyota, Lexus & Scion vehicles
- Retains SWC, navigation outputs, JBL & JBL Synthesis
- Real-time & programmable speaker fade function
- Retains 3.5mm aux audio input
- USB & backup camera retention with additional harnesses (USB-TY1, USB-TY2, CAM-TY11, CAM-TY12)
- Onboard 10A ACC 12V output
- Direct USB in-field updateable
- Includes wired outputs for navigation radio installation, 2 sets of vehicle connectors & necessary firmware for compatibility with broader range of vehicles